foc.us v2 - tPCS - transcranial pulsed current stimulation

Transcranial Pulsating Current Stimulation generates a pulsed current for neuro stimulation.

These are the settings you can alter in tPCS mode.

tPCS - mode settings

Current 0.1 to 2.0mA This is the maximum current used in the session
Duration 1-40 minutes The duration of the neuro stimulation session.
Bipolar OFF / ON Electrodes change from anode to cathode
Max Voltage 10,15,20,25,30,35,40,45,50,55,60V Limit the maximum voltage - can prevent target current being reached if impedance of electrodes and wave path too high.
Sham OFF / BLIND / ON Sham mode current is started but then turned off. Blind sham it can be on or off.
Duration of real current in sham mode 0, 10, 20, 30, 40, 50 seconds The duration that real current is applied before sham mode turns current off
Current Offset 0.0 to 1.7mA The minimum current value
Duty cycle 0, 10, 20, 30, 40, 50, 60, 70, 80, 90% The percentage of the cycle spent at the peak of the pulse
Frequency 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9Hz 
1, 2, 3, 4, 5, 6, 7, 8, 9 Hz 
10, 20, 30, 40, 50, 60, 70, 80, 90 Hz 
100, 150, 200, 250, 300 Hz
The wave frequency in cycles per second
     

<this document is currently being edited - 19th feb>

How to change the tPCS settings on the foc.us v2

Still need help? Contact Us Contact Us