tRNS - transcranial random noise stimulation

Transcranial Random Noise Stimulation generates a random waveform for neuro stimulation.

These are the settings you can alter in tRNS mode.

tRNS - mode settings

Current 0.1 to 2.0mA This is the maximum current used in the session
Duration 1-40 minutes The duration of the neuro stimulation session.
Bipolar OFF / ON Electrodes change from anode to cathode
Max Voltage 10,15,20,25,30,35,40,45,50,55,60V Limit the maximum voltage - can prevent target current being reached if impedance of electrodes and wave path too high.
Sham OFF / BLIND / ON Sham mode current is started but then turned off. Blind sham it can be on or off.
Duration of real current in sham mode 0, 10, 20, 30, 40, 50 seconds The duration that real current is applied before sham mode turns current off
Random current OFF / ON
Randomise the current between 0 and the target current
Random Frequency OFF / ON Randomise the frequency between two values
Frequency 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9Hz
1, 2, 3, 4, 5, 6, 7, 8, 9 Hz
10, 20, 30, 40, 50, 60, 70, 80, 90 Hz
100, 150, 200, 250, 300 Hz
The wave frequency in cycles per second







<this document is currently being edited - 19th feb>



This is how to start a transcranial random noise stimulation from the foc.us v2


Step 1. Press the blue button to wake the foc.us v2

Still need help? Contact Us Contact Us